CNC Turning and Milling Center
CPL-3010SY
X:260 / Y:110(±55) / Z:850 (mm)
C / Y-axis with living turret & Sub-spindle
CPL-3010SY is optimized with sub-spindle which allows automatic part transfer of workpiece from main spindle to sub-spindle, it could save manpower and reduce cycle time. The front and back-end turning applications may be completed in one single machine.
Feature
One-piece 30° slant-bed structure features max. rigidity and stability, it also provides smooth chip disposal and easier operator.
Extra wide Box guideways are directly formed during the casting process, the slide ways are bonded with Turcite-B helps to reduce wearing out and maintain operation accuracy.
Y-axis has ±55 travel can finish the complexity machining work and achieve within a perfect time which can do more than general lathes.
Both main spindle and sub-spindle support fully synchronized rotating which performs automatic part transfer and reduces machine idle time.
Machine Specification
| Item | Unit | CPL-3010SY | |
|---|---|---|---|
| Capacity | |||
| Max. swing over bed | mm (in) | 750 (29.5") | |
| Max. swing over carriage | mm (in) | 650 (25.5") | |
| Max. turning length | mm (in) | 760 (29.9") OPT: 1,260 (49.6") |
|
| Max. milling length | mm (in) | 850 (33.4") OPT: 1,350 (53.1") |
|
| Max. turning diameter | mm (in) | 400 (15.7") | |
| Traverse | |||
| X-axis travel | mm (in) | 260 (10.2") | |
| Z-axis travel | mm (in) | 850 (33.4") OPT: 1,350 (53.1") |
|
| Y-axis travel | mm (in) | 110 (±55) (4.3" (±2.16")) | |
| Feedrate | |||
| Rapid travel (X / Y / Z) | m (in)/min. | 20 / 10 / 20 (787.4 / 393.7 / 787.4) | |
| Spindle | |||
| Spindle nose | type | A2-8 (Built-in) | |
| Hydraulic chuck | inch | 10" | |
| Hole through draw tube | mm (in) | Ø75 (Ø2.9") | |
| Spindle bearing diameter | mm (in) | Ø140 (Ø5.5") | |
| Spindle speed | rpm | 4,000 | |
| Spindle motor | kW (HP) | 15 / 22 (30HP) | |
| Indexing of C-axis | degree | 0.001° | |
| Sub Spindle | |||
| Spindle nose | type | A2-5 (Built-in) | |
| Hydraulic chuck | inch | 6" | |
| Hole through draw tube | mm (in) | Ø32 (Ø1.2") | |
| Sub-spindle motor | kW (HP) | 5.5 / 7.5 (10HP) | |
| Sub-spindle speed | rpm | 5,000 | |
| Indexing of C-axis | degree | 0.001° | |
| Turret | |||
| Turret type | type | 12-Station | |
| Turret system | mm | BMT-65 | |
| Tool change time | sec. | 0.2 | |
| Max. tool speed | rpm | 5,000 | |
| Machine Dimensions | |||
| Floor space | mm (in) | 4,752 x 2,110 (187" x 83") OPT: 5,252 x 2,110 (206" x 83") |
|
| Machine weight | kg (lb) | 8,500 (18,739) OPT: 9,200 (20,283) |
|
| Coolant tank capacity | L (gal) | 250 (66) OPT: 400 (105) |
|
| Power capacity | KVA | 40 | |
| Oil pressure source | kg/cm2 (PSI) | 35~40 (497~568) | |
| Air pressure source | kg/cm2 (PSI) | 6~8 (85~113) | |
Need Inquire ?
If you need more information or quotation about this product, Our sales representative will reply as soon as possible